Installation and start-up
Placement
For safety and operational reasons, the ap- pliance must not be installed outdoors.
The appliance should be placed on a stable, level surface in a dry,
Never place the appliance close to sources of heat such as cookers or radiators, and avoid placing it in direct sunlight.
Room temperature
The climate class is stated on the name- plate (see page 12). This specifies the optimum room temperature.
Climate | Optimum room |
class | temperature |
SN | +10 ºC à +32 ºC |
N | +16 ºC à +32 ºC |
ST | +18 ºC à +38 ºC |
T | +18 ºC à +43 ºC |
If the room temperature is sub zero, the ap- pliance will not function correctly.
Ventilation
It is important that the appliance be well ventilated and that air can circulate unhin- dered above, below and around it. Figure 2 illustrates how the necessary air circulation can be ensured.
GB
800 mm
100 | mm |
|
|
|
|
| 100 | mm | |
|
|
| ||
|
|
|
| |
|
| 20 | mm |
|
|
| fig. 2 |
| |
|
|
|
|
There must be at least 15 mm clearance between the base of the appliance and the floor.
IMPORTANT! There must be free access to the ventilation grille (fig. 3).
fig. 3
5
