Smeg CR328APZD Control Panel, Replacing the bulb, Freezer compartment, Refrigerator compartment

CB 310W Fan

CONTROL PANEL

2 6 8 14

1 3 4 5 7 9 11 15

Freezer compartment

1.Appliance On/Off button

2.Freezer temperature increase button

3.Freezer temperature decrease button

4.Freezer temperature setting display

12.Super function yellow LED

13.Super function button

10.Alarm red warning light

11.Acoustic alarm deactivation button

Refrigerator compartment

5.Refrigerator compartment On/Off button (Vacation function)

6.Vacation function green LED

7.Refrigerator temperature setting display

8.Refrigerator temperature increase button

9.Refrigerator temperature decrease button

14.Super function yellow LED

15.Super function button

For further information on the functions mentioned above, please consult the user handbook.

CONTROL PANEL LOCK

The control panel can be locked after selecting the temperature of the refrigerator and freezer compartments.

To activate this function, simultaneously press buttons 13 and 15 for at least 3 seconds. An acoustic signal will indicate the activation of the function. With the "Control Panel Lock" function activated, the entire control panel will be locked except for button 11 (alarm reset). An acoustic signal will sound and the message "CL" will appear on the freezer temperature display whenever and for the entire time a key is pressed.

To unlock the control panel, proceed as before, simultaneously pressing buttons 13 and 15 for at least 3 seconds.

Note: the ambient air temperature, frequency of door opening and position of the appliance can affect the temperatures inside the refrigerator and freezer compartments. We therefore recommend adjusting the settings in relation to these factors.

Fan:

The fan provides more uniform temperature distribution inside the refrigerator compartment, thus allowing better conservation of stored food. In the event the ambient air temperature exceeds 27 - 28 °C, switch on the fan. To switch on the fan press button (11a).

Important:

The fan will run ONLY when the compressor is in operation. Do not obstruct the fan intake area with food (11b).

Replacing the bulb

1 - Loosen the screw and remove the lamp cover.

2 - When replacing the bulb, remember that this appliance is fitted with a special bulb (max. 25W with bayonet connector, only available from the After-sales Service); to replace the bulb, do not unscrew it, but pull it towards the inside of the refrigerator (as indicated by the arrow).

5019 608 01022 D GB F NL E P I GR S N DK FIN