Instructions for the user
11.2 Removing the door
Open the door completely and fit the pins (supplied) into the holes from the inside. Close the door to an angle of about 45°, lift it and remove it from its seat. To replace, fit the hinges into the grooves provided, then lower the door until it comes to rest and extract the pins. If the pins are lost, two screwdrivers can also be used.
11.3 Oven door gaskets
The door gaskets can be dismantled for thorough cleaning of the ovens. Before removing the gaskets the oven doors must be removed as previously described. With the doors removed, raise the tabs at the corners as shown in the figure.
11.4 Lubrication of gas taps
With time it may happen that the gas taps get blocked and hard to turn. Clean them inside and
by a specialised technician.
76
