Instructions for the user

10.2 Cleaning of cooking hob components

Before performing any operations requiring access to powered parts, switch off the power supply to the machine.

10.2.1 Barbecue griddle

Extract the griddle from its seat (after leaving it to cool) by lifting it from the front as shown in the diagram and taking care not to spill the residues which have collected in the grooves at the sides. Clean it with an ordinary detergent and a non-abrasive sponge.

10.2.2 Barbecue drip tray

To remove the drip tray under the barbecue element:

1.Remove the griddle as described in point 10.2.1;

2.Raise the heating element and fix it in place by sliding the retainer to the right (as shown in the adjacent diagram);

3.Remove the drip tray using the two handles and clean using specific detergents for stainless steel and a non-abrasive sponge.

10.2.3Grids

Remove the right-hand pan stands (griddle + fish burner) as shown in the diagram. There is no special order for removal of the left-hand pan stands. Clean the pan stands in warm water and non-abrasive detergent, taking care to remove all deposits. Replace, fitting first the outside pan stand then the griddle.

72

Page 32
Image 32
Smeg CS120-6, CS120A-6 manual Cleaning of cooking hob components, Barbecue griddle, Barbecue drip tray, Grids