Smeg DO10PSS manual Electronic Analogue Clock Only On Some Models, Setting the time, Minute-minder

Instructions for the user

5.ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS)

The programmer user instructions are valid only for the large oven.

LIST OF FUNCTIONS

MINUTE-MINDER BUTTON

AUTOMATIC DURATION / AUTOMATIC STAR TIME BUTTON

TIME SETTING AND RESET

DECREASE TIME BUTTON

INCREASE TIME BUTTON

5.1Setting the time

When the oven is used for the first time, or after a power failure, the display flashes on and off at regular intervals. Press the key for 1 to 2 seconds to stop the display flashing and start setting of the current time. Press the or keys to increase or decrease by one minute each time a key is pressed.

Press one of the two value modification keys until the current time appears. The clock will start from the time set 6/7 seconds after the last key is pressed.

At the end of each programmed cooking operation, an intermitant alarm will sound 3 to 4 times at intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any key.

5.2Minute-minder

This function does not stop cooking but just triggers the alarm.

-When the key is pressed the display illuminates, appearing as shown in figure 1;

-Press the or keys within 6 to 7 seconds to set the minute-minder. Whenever a key is pressed, 1 outside segment, representing 1 cooking minute will light up (figure 2 shows 10 cooking minutes).

-The countdown will start 6 to 7 seconds after the last key is pressed; at the end of it, you will hear the alarm.

-During cooking with countdown, the current time can be displayed by pressing the key once; press again to return to the minute-minder display.

-At the end of the countdown, the oven has to be switched off by hand, by turning the thermostat and the function selector to 0.

1

2

31