Strictly switch the appliance off prior

 

cleaning (unplug the power cord from the

 

wall socket, or turn the program selector

 

jog to the position “0”).

 

Clean the casing and drum interior with soft cloth

 

and mild detergent.

 

Periodically clean (vacuum) the interior of air

Cleaning of evacuation

drier

evacuation opening and evacuation tube.

 

Clean water condenser two to three times a year.

Cleaning the water

condensation device

In case of frequent use of the appliance do it

 

even more often. Certain amount of water may

 

drip from the condenser when pulled out, so use

 

absorbing cloth for this operation.

 

Open the exterior lid of the condenser by grabbing

 

the handle on the lower left part of the appliance

 

housing and pull it downwards.

 

Remove interior hatch by rotating the lever

 

vertically down, tilt the hatch towards you and

 

remove it.

 

Turn the lock on the condenser upwards and pull

 

the condenser out by pulling the lever.

 

Clean the device from both sides with lukewarm

 

water and drain it well.

 

Before replacing it into its slot, clean the air

 

channel in which the device is mounted, and the

 

gasket at the interior lid.

 

Lock the condenser into its place.

 

Insert the inner lid to seal well and lock it with a

 

handle.

 

Push the exterior lid towards the appliance to lock

 

to its place.

129530

22

Page 22
Image 22
Smeg DRY63CS manual Cleaning of evacuation, Drier, Cleaning the water, Condensation device