Installation and connection

Removing wrapping

Selecting the appropriate location of the appliance

Installation

Packaging materials are environmentally friendly: they can either be recycled, safely disposed of or destroyed without any threat to the environment.

To be able to do this effectively all materials are marked accordingly.

Be careful not to damage cabinet of the appliance with a sharp object when removing the packaging.

Ventilation slots and openings on the appliance front and rear wall should not be obstructed.

A - Evacuation dryer

Place the appliance in a well ventilated room with a window or a built-in fan.

Connect the evacuation tube to the pre-prepared opening.

Evacuation must not be connected to air duct used as a chimney for exhaust gasses of appliances using other combustion material.

B - Condenser dryer

Do not place the appliance in a room where there

is danger of freezing.

 

Location should be adequately ventilated. Room

 

temperature should always be between 0°C and

 

25°C since frozen water in the condensation

 

water receptacle or in the pump may damage the

 

dryer.

 

Appliance can either stand on its own or can

 

be placed on top of a washing machine of the

 

same dimensions - minimum width 517 mm,

 

depth 476 mm. The surface for placing the dryer

 

must be clean and flat. Use supplied vacuum

 

feet to prevent sliding of the appliance. Washing

 

machine hardtop must be wooden or metallic. To

 

conceal the opening between the two appliances,

 

decorative plate is available on request against

129530

payment.

7

 

Page 7
Image 7
Smeg DRY63CS manual Installation and connection, Evacuation dryer, Condenser dryer