The distance between the dryer and the moist air outlet (vent shaft, window) should not exceed 2 meters, otherwise water can accumulate in the tube.

B - Condenser dryer

Moisture from laundry is extracted in the water

 

condensation device and is either collected in the

 

receptacle or discharged directly into the drain

 

(drain height should not exceed 800mm).

 

Display reads CONTAINER FULL and a beep is

 

heard when the water receptacle is full and should

 

be emptied, preferably after each drying cycle.

 

Use the power cord to connect the dryer to the

Power connection

 

power supply via wall socket.

 

Rated voltage and other characteristics are

 

indicated on the name plate, located under the

 

door frame of the appliance.

 

The wall socket should always be within

 

reach. It has to be earthed according to the

 

standing regulations.

 

If the supply cable is damaged it should

 

only be replaced by a qualified technician.

129530

9

Page 9
Image 9
Smeg DRY63CS manual Power connection