129530
129530
• After every drying clean the lter, located in the
inner part of the door.
• Lift the lter lid (Fig.).
• Pull your ngers over the lter to remove bers
and threads lining. Replace the lter cover (it must
snap in place at the bottom).
• If necessary, also clean the lter housing and door
sealing.
If the lter is clogged in such way that it needs
washing, pull it out from its bed (Fig.), wash it under
hot water and dry. Be sure that the replaced lter
snaps safely to its position, and only then close the
lter lid.
If the lter is not regularly cleaned, the
airow is obstructed, which causes longer
drying time and danger of overheating.
Empty the container and occasionally
clean the water condensation device.
Emptying the water containere
Empty the container after every drying procedure:
pull the container out, pull out the draining nozzle,
pour out the water and replace the container.
Water from condenser tank is not
drinkable! If ltered it may be used for
ironing.
20
21
Cleaning and maintenance
Cleaning the lter
Cleaning the
condensation dryer