Instructions for the User
9. EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as gaskets, bulbs, etc. The following instructions describe how to carry out these minor maintenance operations.
Before any intervention that requires access to live parts, disconnect the power supply of the appliance.
9.1Replacing the light bulb
If a light bulb needs to be replaced because it is worn or burnt out (in multifunction models remove the guide frames; see “8.5.1 Removing guide frames”).
Then remove the bulb cover using a tool (e.g. a screwdriver).
Remove the bulb by sliding it out as shown.
On some models only: the bulbs are
halogen bulbs, so do not touch them directly with your fingers, wrap them in an insulating material.
Replace the bulb with one of the same type. Replace the cover correctly, so that the moulded part of the glass is facing the door.
Press the cover down as far as it will go so that it attaches completely to the bulb support.
33
