Smeg FA550X2, FA550XBI2 Using the Automatic ICE-MAKER, To remove and replace the ice container

USING THE AUTOMATIC ICE-MAKER

After switching on the refrigerator, it usually takes overnight for the first ice cubes to form. When selecting crushed ice, the cubes are crushed just before being dispensed, therefore the crushed ice may come out with a slight delay. Noise from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed ice to ice cubes, a small amount of crushed ice may come out together with the first cubes.

Normal ice production consists of about 12 to 14 batches of ice cubes in a 24-hour period. The quantity and size of the ice cubes depend on the mains water pressure. Ice cubes production can be increased by decreasing the temperature on the freezer compartment.

Recommendations for the use of the automatic ice maker

When the door of the freezer compartment is open, ensure that the small flap, which functions as a sensor to stop the distribution of ice from the automatic ice maker to the ice container located on the inner door is not obstructed.

1

To remove and replace the ice container

1.Insert your fingers in the opening at the bottom of the container and place your thumb on the release button.

2.Holding the base of the container with both hands, press the release button, lift the container upwards and remove.

To replace the ice container in its place, place it on its support attached to the inner door and lower in position.

Note: Large amounts of ice cubes should be taken directly from the bucket, and not from the dispenser.

2

33