Smeg FA550X2, FA550XBI2 manual Multiflow AIR Distribution, Guide to the Inside Parts

Models: FA550X2 FA550XBI2

1 18
Download 18 pages 60.06 Kb
Page 7
Image 7

“MULTIFLOW” AIR DISTRIBUTION

“MULTIFLOW” is a ventilated air distribution system, which ensures a homogeneous temperature inside the refrigerator compartment. Thanks to this system, the different types of food can be stored on any of the shelves of the appliance. Attention should be paid not to obstruct the air distribution vents, thus ensuring free air circulation.

GUIDE TO THE INSIDE PARTS

Removing and repositioning the refrigerator compartment and freezer shelves

The shelves can be positioned as required. The glass shelves are strong enough to hold bottles, milk cartons and heavy food, however, take care not to bang products on the shelves. To remove the shelves: pull the shelf out as far as it goes, then lift and remove it.

Removing the crisper or meat drawer:

1.slide the drawer out as far as it goes;

2.with one hand underneath the drawer, lift and pull it out;

3.the drawer will come off the runners and can be pulled out further;

4.to remove it completely, the drawer must be turned: front end up, rear end down.

Removing and refitting the glass drawer lid

Lift the front of the frame about 10 cm with one hand, then lift the back of the frame and pull it out with the other.

To replace the lid follow the inverse procedure.

Note: To remove the drawers and lids in the freezer compartment follow the same procedure as for the refrigerator.

Meat/vegetable drawer temperature control device

The cold air is conveyed inside the meat drawer through an opening between the refrigerator compartment and the freezer compartment. In this way the temperature inside the meat drawer is kept lower than the rest of the refrigerator. The air flow can be adjusted by means of the special slider.

To store vegetables in the meat drawer, shift the control device all the way to the left, to the vegetables setting. This avoids possible damage due to the vegetables freezing.

Crisper moisture control device

The level of humidity inside the crisper can be adjusted by moving the slider in the desired position.

By moving the slider to the far right, humidity will be eliminated from the compartment. This setting is better for preserving fruits and vegetables with skin.

By moving the slider to the far left, humidity is maintained inside the compartment. This setting is better for preserving leaf vegetables.

27

Page 7
Image 7
Smeg FA550X2, FA550XBI2 manual Multiflow AIR Distribution, Guide to the Inside Parts