Smeg FP131B1 manual Instructions for the user, Automatic cooking, time required to be set

Models: FP131B1

1 30
Download 30 pages 53.71 Kb
Page 11
Image 11
7.5.3 Automatic cooking

Instructions for the user

7.5.3 Automatic cooking

Automatic cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user.

Select a cooking function, set the cooking temperature required or leave the preset temperature (see point “7.4 Function selection”) and press PT1

twice. The display will show the (flashing).

figures and the

symbol

Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to 23:59).

For reasons of safety, when setting automatic cooking the user must first program a cooking duration and then set the cooking start time. It is not possible to set the cooking start time only, without setting the cooking duration.

After setting the duration, press PT1 once.

The time required to be set. symbol and the current time will appear on the display.

Turning PT1 to the right increases the time, allowing the cooking start

time required to be set.

A few seconds after the required duration is set, the To switch the oven off completely, PT2 must be turned to 0. and Manual background symbols will stop flashing and remain constantly on, and the oven will start to wait for the starting time set. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to deactivate it.

If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the cooking settings selected previously.

To switch the oven off completely, PT2 must be turned to 0.

Modifying the data set

Once automatic cooking has started, its duration can be changed.

When the Manual background and Manual background symbols are steady and cooking is in progress, or the oven is in standby status waiting for cooking to start, press PT1 once.

The Manual background symbol starts flashing and PT1 can be turned to change the set duration.

Press PT1 again; the Manual background symbol goes out, the Manual background symbol will start to flash, and the cooking start time will be displayed on DSP1. The cooking start time can be increased or decreased by turning PT1.

A few seconds after the last change, the Manual background and Manual background symbols will appear (in steady mode) on DSP1 and automatic cooking will restart with the new settings.

43

Page 11
Image 11
Smeg FP131B1 manual Instructions for the user, Automatic cooking, time required to be set, Modifying the data set