Instructions for the user
Cleaning:
• Now it is possible to clean the external glass and the previously removed panes, using absorbent kitchen roll or, in the case of persistent dirt, washing with a damp sponge and neutral detergent.
Replacing the glass:
• Replace the panes in the opposite order to which they were removed. The first middle glass pane must be inserted first on the front part, exactly on the first level (figure A), and then inserted on the back, again in the first level (figure B).
• Pay careful attention to the four rubber strips on the sides (figure C). These must be lowered during the insertion of the first middle glass pane acting as a seal between the frame and the pane of glass.
•The second middle glass pane must be inserted first on the front part, on the second level
(figure A), and then inserted on the back, again in the second level (figure B).
•Replace the internal glass pane inserting it on the third level in the same way as described for the middle panes. (figure A, B).
Warning: replace the glass panes in the same order and in the same direction that they were removed. Finally, if the door was not removed, unlock the hinges and close it.
59
