HOW TO OPERATE THE REFRIGERATOR COMPARTMENT
Switching on the appliance
1.Plug in the appliance.
2.The appliance switches on. The temperature is factory set to 5 °C.
An acoustic alarm sounds if the door is left open for more than 2 minutes (see section “Refrigerator door open alarm” in this chapter).
Temperature adjustment for refrigerator compartment
To adjust the temperature in the refrigerator compartment, proceed as follows:
•press button (A) 
to increase the temperature;
•press button (A) 
to lower the temperature.
Note:
Room temperature, frequency of door opening, the introduction of hot food and incorrect positioning of the appliance can affect the internal temperature of the refrigerator, which may differ from that indicated on the panel.
Switching off the appliance
If the appliance is not to be used for a prolonged period, it can be switched off by pressing button (C). Although connected to the power supply, the appliance is effectively deactivated, with the interior light switched off and all LEDs off except the red LED associated with button (C). To switch the appliance on again, press button (C).
Refrigerator door open alarm
If the refrigerator door is left open accidentally, the appliance issues a warning by means of the interior intermittent light. When the door has been left open for 2 minutes the light begins to blink. It will stop blinking when the door is closed.
How to use the refrigerator compartment
Position the food as shown in the figure:
ACooked food
BFish, meat
CFruit and vegetables
DCheese
EBottles
Notes:
•The space between the shelves and the rear wall of the refrigerator compartment must be unobstructed to allow circulation of air.
•Do not place food in direct contact with the rear wall of the refrigerator compartment.
•Do not place hot food in the refrigerator.
•Store liquids in closed containers.
Important
•Storing vegetables with high water content can cause condensation to form in the crisper: this will not affect the correct operation of the appliance.
16
