Smeg FU67-5, FU65-5 Extraordinary Maintenance, Replacement of oven light bulbs, Removing the door

Instructions for the User

8. EXTRAORDINARY MAINTENANCE

The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.

WARNING ELECTRICAL SHOCK HAZARD

Before any intervention, disconnect the power supply of the device.

8.1 Replacement of oven light bulbs

Remove upper oven protection A and ring B as well as the glass cover C, unscrewing it anticlockwise. Replace light bulb D. Reassemble ring B, cover C and upper protection A.

CAUTION: The standard bulbs are halogen: do not touch them directly with your fingers. Use insulation to protect your hand. Use only bulbs that are available at authorized service centers.

8.2 Removing the door

Use the two splines provided

Open the door, insert the splines G (provided) into the slit of the hinges and push them towards the oven. Half-close the door upward to form an angle of approximately 45°, then lift up and slide off.

For re-assembly, insert the hinges into its groove then let the door rest downwards and extract splines G.

Use two screwdrivers

Open the door and fit the screwdrivers into the hinge holes from the inside.

Half-close the door upward to form an angle of approximately 45°, then lift up and slide off.

For re-assembly, insert the hinges into its groove then allow the door to rest downward and remove the screwdrivers.

17