Smeg KIV90X manual Connect the Hood to the Mains power sup

	ELECTRICAL CONNECTION
•	Connect the Hood to the Mains power sup-
	ply, inserting a two-pole Switch with a con-	1
	tact aperture of at least 3 mm.
•	Remove the Metal grease filters (see par.	2
	on “Maintenance”) and make sure that the
	power supply Cable is properly inserted in
	the Suction fan socket.

•Take the wires indicated in fig.1 and pass them through the slot formed on the galva- nized diffuser support, as shown in fig.2.

•Position the finishing plug 27 over the housing in the diffuser support, fixing it us- ing a screw 12e (2.9 x 9.5) and applying the 2 cable clamp elements 26 as indicated in figs. 3 and 4.

•Connect the Controls Connector fig. 5.

•Connect the Lighting Connector fig. 6.

•Store both the Connectors in the Protective box 24 and close it with 2 Screws 12e (2.9 x 9.5), provided.

•Remove the protective film from the dou- ble-sided adhesive on the connection box, and fix it inside the motor compartment fig. 7.

43

6

5

7

EN	2
	20