MAINTENANCE
Grease filters
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
Alarm signal reset
•Switch off the lights and extractor motor.
•Press button V3 for at least 3 seconds, until the leds start to flash.
Cleaning the filters
•The filters are washable and must be cleaned when led S1 flashes or at least every 2 months of operation, or more frequently for particularly
heavy usage.
• Remove the filters one at a time by pushing them towards the back of the group and pulling down at the same time.
•Wash the filters, taking care not to bend them. Allow them to dry before refitting.
•When refitting the filters, make sure that the handle is visible on the outside.
GB |
| 20 |