Manuals / Smeg / Kitchen Appliance / Cooktop

Smeg PGF95BE-2, PGF95-2 manual Instructions for the installer

Models: PGF95-2 PGF95BE-2

1 17

Download 17 pages 30.56 Kb

Page 6

Image 6

Apply a layer of “waterproof primer” to the milled surface.

Instructions for the installer

Mill to this depth for laminated worktops of less than 3mm thickness.

Apply a layer of “waterproof primer” to the milled surface.

Important: Other types of installation will only be possible under the manufacturer's supervision.

Overall dimensions: location of gas and electrical connection points (all measures in mm).

Caution: surface temperature underneath may exceed 125 degrees C. To avoid a hazard, under-bench access must be restricted.

Refer to installation instruction

Page 6

Image 6

Smeg PGF95BE-2, PGF95-2 manual Instructions for the installer, Apply a layer of “waterproof primer” to the milled surface

Contents

Summary 3 ADJUSTMENT TO DIFFERENT TYPES OF GAS 4 FINAL OPERATIONS5 USING THE HOB 6 CLEANING AND MAINTENANCE 1 INSTRUCTIONS FOR SAFE AND PROPER USE 2 POSITIONING OF THE HOBNEVER UNPLUG THE APPLIANCE BY PULLING THE POWER SUPPLY CABLE Introduction1 INSTRUCTIONS FOR SAFE AND PROPER USE THE MANUFACTURER DECLINES ALL LIABILITY FOR IMPROPER USEIntroduction THE DATA PLATE ON THE PROTECTIVE COVER MUST NEVER BE REMOVEDInstructions for the installer 2 POSITIONING OF THE HOB2.1 Attachment to support structure, traditional built-in model fig 2.2 Attachment to support structure, flush-mounting model Instructions for the installerInstructions for the installer Apply a layer of “waterproof primer” to the milled surfaceInstructions for the installer If installed above an under-bench oven, this is not required2.3 Electrical connection Instructions for the installer2.4 Ventilation requirements 2.5 Discharge of combustion productsInstructions for the installer Connection with rigid copper pipe 2.6 Gas connection2.7 Connection to LPG Connection with flexible steel pipe3 ADJUSTMENT TO DIFFERENT TYPES OF GAS 3.1 Replacement of nozzles on the hobInstructions for the installer BURNERS 3.2 Burner and nozzle characteristics table3.3 Arrangement of burners on cooking hob Instructions for the installer4.2 Regulation of minimum for LPG 4 FINAL OPERATIONS4.1 Regulation of minimum for town gas and natural gas 4.3 Lubrication of gas taps5 USING THE HOB Instructions for the user5.1 Ignition of the burners Ø min. and max. cm 5.2 Practical advice for using the burners5.3 Diameter of receptacles Instructions for the user6.2 Cleaning of cooking hob components 6 CLEANING AND MAINTENANCE6.1 Cleaning the stainless steel 6.1.1 Routine daily cleaningInstructions for the user