Instructions for the installer
2.6Gas connection
Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe conforming to the provisions defined by standard regulations in force.
After connection operations, check for leaks using a soapy solution.
The hob has been inspected for G20 natural gas (2H) at a pressure of 20 mbar. For use with other types of gas, see chapter “3. ADJUSTMENT TO DIFFERENT TYPES OF GAS. The hose connection at the rear of the appliance has a ½” internal thread (ISO
Connection with rigid copper pipe:
the connection to the gas mains must not provoke stress of any kind on the appliance.
Connection may be made by using biconicaladapter D with insertion of gasket C supplied.
Connection with flexible steel pipe:
use only flexible stainless steel pipes conforming to standard regulations in force, inserting gasket C supplied between the fitting A and the flexible pipe B.
The flexible pipe must be installed so that pipe length does not exceed 2 meters of maximum extension. Make sure that the pipes do not touch any moving parts or become crushed.
2.7Connection to LPG
Use a pressure regulator and make the connection to the tank according to the provisions of standard regulations in force. Make sure that feed pressure conforms to the levels shown in the table in paragraph “3.2 Burner and nozzle characteristics table
29
