Smeg PS906 manual Instructions for the installer

Instructions for the installer

If a plug and socket connection is being used make sure that the plug and socket are compatible. Avoid use of adapters and shunts as these could cause overheating and burns.

Operation at 220-240 V~: use a three-core cable of the type

H05V2V2-F (3 x 1.5 mm2 cable for

electric hobs and 3 x 0.75 mm2 cable for gas hobs)

The end to be connected to the appliance must be an earth wire (yellow-green) at least 20 mm longer.

The manufacturer declines all responsibility for damage to persons or

things caused by the non-observance of the above prescriptions or deriving from tampering with any part of the appliance.

35