Components
The images shown in this installation instructions are for illustrative purpose only. Check the supplied components before starting.
∏ 2 Wall mount brackets | ∏ 1 AC power supply cord | ∏ 2 Screws |
| (RFAX1027) |
|
|
|
|
∏2 Lock pins
(RYQX1048)
Commercially available components (not supplied) |
|
≥ Screws for wall mounting | ≥ Screws to attach fall prevention cord to wall |
≥Fall prevention cord
≥Use commercially available screws with a nominal diameter of 4.0 mm (5/32q) that are suited to the wall material (wood, steel
frame, concrete etc.) you are attaching the wall mount brackets to.
≥Product numbers correct as of April 2010. These may be subject to change.
Installation procedure
Never use any other method than specified to install
Attaching the wall mount brackets
Preparation
≥ To prevent damage or scratches, lay down a soft | ≥ Keep the screws out of reach of children to |
cloth and perform the assembly on it. | prevent swallowing. |
|
|
≥Do not hold this unit in one hand to avoid injury by dropping this unit when carrying.
1 On the rear of the unit:
Place the wall mount bracket by aligning the holes in the wall mount bracket with the projecting parts A.
2 Screw the wall mount bracket firmly into place.
≥Screw tightening torque: 80 N0cm (17.98
≥Repeat the steps above when installing the second wall mount bracket.
|
Installation Instructions
23
