Panasonic SC-HTB10 Placement, If the TV’s remote control sensor is Blocked by this unit

Placement

Caution

≥This unit and the supplied wall mount brackets are to be used only as indicated in

these operating instructions or the installation instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

≥Do not attempt to attach this unit to a wall using methods other than those described in this manual.

How you place this unit can affect the bass and the sound field.

Place this unit near the TV.

This unit should be placed parallel to the seating position.

E.g.,

On the wall In a rack§1, 2, 3 On a table§1, 2, 3, 4, 5

To attach this unit to the wall, refer to the installation instructions. (> 21)

Installation work should never be done by any other than a qualified installation specialist.

§1 Place this unit on a flat secure base. (Do not place this unit on the TV’s pedestal.)

§2 To allow for proper ventilation and to allow for proper air flow around this unit, position it with at least 5 mm (3/16q) of space on all sides of this unit.

§3 Secure the unit to prevent it from falling. (> 9)

§4 Do not place this unit in front of a 3D compatible TV. This unit may block the transmitter for the 3D eyewear. §5 Do not place this unit too close to the TV. This unit may interfere with the TV’s various sensors (ambient light, etc.).

≥You can damage the speakers and shorten their useful life if you play sound at high levels over extended periods.

≥Placing this unit too close to the floor, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.

∫If the TV’s remote control sensor is

blocked by this unit.

Try using the TV’s remote control from a different angle. If the problem persists, you can use the optional Panasonic IR Blaster (SH-WR10) to relay the signal to the TV.

≥The optional Panasonic IR Blaster (SH-WR10) is

only compatible with Panasonic TVs. Purchase SH-WR10 (Accessory IR Blaster) at selected dealers or online by visiting our Web Site

8 at: http://www.panasonic.com

or in Canada: http://www.panasonic.ca

For details, please refer to the operating instructions for the optional Panasonic IR Blaster.

≥Do not use the IR Blaster if the TV's remote control sensor is not blocked by this unit.

∫If irregular coloring occurs on your TV,

turn the TV off for about 30 minutes.

If it persists, move this unit further away from the TV.