Instructions for the installer
2. INSTALLATION OF THE APPLIANCE
It is the law that all gas appliances are installed by an authorised persons. Clearance around the appliance must comply with the requirements of AGA601. (see 2.6)
2.1 Positioning
The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C).
Overall dimensions: location of gas and electrical connection points (all measures in mm).
|
| PVA 96 |
|
|
|
A | 50 | |
|
|
|
B | 90 | |
|
|
|
C | 50 | |
|
|
|
D | 60 |
2.1.1 Fixing
Insert screws A of the brackets provided into slots B under the appliance. Slide the brackets into slots B. Position the appliance on to the support frame and secure it by means of screws C.
2.2 Electrical connection
Make sure that the voltage and capacity of the power line conform to the data shown on the plate located under the casing. Do not remove this plate for any reason.
6