6GB10055.fm Page 15 Monday, August 2, 2004 12:33 PM

INSTALLATION

Removal of transport bracket

The washing machine is fitted with a transport bracket to avoid any possible damage during transport.

Before using the washing machine, the transport bracket at the back MUST be removed.

1.Unscrew the two screws A and the four screws B with a flat screwdriver or a No. 8 hex nut box spanner.

2.Remove the transport bracket.

3.Replace the four outer screws B on the machine and tighten them.

4.Remove the two seals C from the hose holder and clip them into the openings of the machine D.

Note: do not forget to replace and tighten the four outer screws.

AB

D

1

1

1

2

C

4

D

4

GB 15

Page 15
Image 15
Smeg S800TL manual Installation, Removal of transport bracket