Preliminary instructions
DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. TO AVOID BURNS AND SCALDS CHILDREN SHOULD BE KEPT AWAY
NEVER ALLOW THE OVEN TO BE USED BY CHILDREN OR INFIRM PERSONS WITHOUT ADULT SUPERVISION.
DURING THE AUTOMATIC CLEANING CYCLE (PYROLYSIS) THE OUTER DOOR WINDOW COULD BECOME HOTTER THAN NORMAL. KEEP CHILDREN AT A DISTANCE.
NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN. IF THIS WERE ACCIDENTALLY LIT IT COULD CAUSE A FIRE.
1.1DISPOSING OF PACKAGING
Always dispose of packaging in a proper manner. The best thing is to get rid of it through a
1.2DISPOSING OF OLD APPLIANCES
Before throwing away an old appliance, make sure this is rendered harmless and dispose of it through a
1.3INSTALLING THE OVEN
If a fixed connection is being used fit cable with an omnipolar circuit breaker with a contact opening gap equal to or greater than 3 mm in an easily accessible position near to the oven.
If a plug and socket connection is being used make sure that the plug and socket are compatible. Avoid use of adapters and shunts as these could cause overheating and risk of burns.
The power cable must be changed by the manufacturer or by an authorised service centre to prevent any risks. The new cable must be FG40R3G type (3 x 1.5 mm2).
The oven is designed for installation into any piece of furniture as long as it is
For installing in a column, follow the dimensions given in Figure 2 allowing for a clearance of 80 to 90 mm at the top and sides of the column. Tighten the four screws (ref.A) inside the frame to secure (Fig. 1).
For installing beneath a separate hob, allow for a rear and bottom clearance as shown in Figure 1 (ref. B). See relevant instructions for fitting and securing the hob.
6
