Instructions for the User
Once PT1 has been pressed, the oven will return to normal operation. PT2 has to be pressed to switch the oven off completely.
Modifying the data set
Once semiautomatic cooking has started, its duration can be changed.
When the 
symbol is steady and cooking is in progress, press PT1 once. The 
symbol starts flashing and PT1 can be turned to change the
set duration. A few seconds after the last change, the 
symbol will stop flashing, and semiautomatic cooking will restart from the new value.
To change the preset temperature, wait for the 
symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.
7.5.3 Automatic cooking
Automatic cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user.
Select a cooking function, set the cooking temperature required or leave the preset temperature (see point “7.4 Selecting the function”) and press
PT1 twice. The display will show the 
figures and the 
symbol (flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to 23:59).
For reasons of safety, when setting automatic cooking the user must first program a cooking duration and then set the cooking start time. It is not possible to set the cooking start time only, without setting the cooking duration.
After setting the duration, press PT1 once.
The 
symbol and the current time will appear on the display.
Turning PT1 to the right increases the time, allowing the cooking start
time required to be set.
A few seconds after the required duration is set, the 
and 
symbols will stop flashing, and the oven will start to wait for the starting time set. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 to deactivate it.
Once PT1 has been pressed, the oven will return to normal operation. PT2 has to be pressed to switch the oven off completely.
42
