Instructions for the User
Power Function
The power function allows the user to increase the power of zones 2 and/or 3 for a time of 10 minutes. This function can be used, for example, to bring a large amount of water to the boil in a hurry, or to turn up the heat under meat.
Turn the knob to the right and set heating level 9, then use the knob to set the “P” position and release it. “P” appears on the corresponding zone display.
Turn the knob to the right and set heating level 9, then use the knob to set the “P” position and release it. “P” appears on the corresponding zone display.
After 10 minutes, the power is reduced automatically, the knob returns to the 9 setting and the “P” disappears.
However, the power function can be turned off at any time by reducing the heating level.
The rear zones can only be operated at maximum power by reducing the supply of power to the front zones. When the “power” function is enabled, the front zones will be unable to operate at levels above 8 for the front
Consequently, the power function takes priority over the heating accelerator.
If a pan is removed from the cooking zone while the power function is on, the function is switched off.
THERMOSTAT KNOB
The cooking temperature is selected by turning the knob clockwise to the required setting, between 50° and 275°C.
The light comes on to indicate that the oven is heating up. This light goes out when the set temperature is reached. Flashes at regular intervals to indicate that the temperature inside the oven is being kept constantly at the set level.
FUNCTION SELECTOR KNOB
The electric oven's various functions are suitable for different cooking modes. After selecting the function required, set the cooking temperature using the thermostat knob.
TOP AND BOTTOM HEATING ELEMENTS | GRILL ELEMENT + FAN |
GRILL | BOTTOM HEATING ELEMENT + FAN |
GRILL ELEMENT + ROTISSERIE | FAN HEATING ELEMENT |
BOTTOM HEATING ELEMENT | TOP + BOTTOM HEATING ELEMENTS + |
| FAN HEATING ELEMENT |
TOP AND BOTTOM HEATING ELEMENTS | AUTOMATIC CLEANING CYCLE |
+ FAN FUNCTION | (PYROLYSIS) |
DOOR INTERLOCK WARNING LIGHT
During the automatic (Pyrolysis) oven cleaning cycle, this light comes on to indicate that the oven door interlock has been activated.
49
