To switch the oven off completely, turn PT2 to the "0" symbol.

Instructions for the User

Warning: the minute minder does not stop the cooking process. It only warns the user that the preset number of minutes have passed.

To switch the oven off completely, turn PT2 to the "0" symbol.

Modifying the data set

Once the countdown has started, its duration can be changed while cooking is in progress.

When the Modifying the data set symbol is steady, press PT1 once. The 7.5.2 Semiautomatic cooking symbol starts flashing and PT1 can be turned to change the set duration. A few seconds

after the last change, the Turn PT2 to the "0" symbol to switch the oven off completely. symbol will stop flashing, and the countdown will restart from the new value.

To change the preset temperature, wait for the Manual background symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

7.5.2 Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user.

Select a cooking function (see point “7.4 Selecting the function”) and press

PT1 twice. The display will show the Manual background figures and the Manual background symbol (flashing).

Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to

23:59). A few seconds after the required duration is set, the Manual background symbol will stop flashing, and semiautomatic cooking will start from that moment. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to deactivate it.

If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the cooking settings selected previously.

Turn PT2 to the "0" symbol to switch the oven off completely.

Modifying the data set

Once semiautomatic cooking has started, its duration can be changed.

When the Manual backgroundsymbol is steady, press PT1 once. The Manual background symbol starts flashing and PT1 can be turned to change the set duration. A few seconds

after the last change, the Manual background symbol will stop flashing, and semiautomatic cooking will restart from the new value.

To change the preset temperature, wait for the Manual background symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

40

Page 10
Image 10
Smeg SCP107AL, SCP108SG manual Instructions for the User, To switch the oven off completely, turn PT2 to the 0 symbol