GB
replaced by the manufacturer since special tools are required.
Avoid the mains cable resting against the hob or oven casing oven if installed in the same piece of furniture.
Note:
•The adhesives used in the manufacture of the furniture or for applying decorative laminas or the surface layer of the work top must be able to withstand temperatures of up to 1000 C.
•When handling the hob prior to installation, take care to avoid cuts caused by sharp edges or corners.
•When kitchen furniture or equipment is being installed above the hob, cover it with a suitable protective sheet, to protect it against breakage due to blows or excessive pressure.
•Remember that the glass is not coverd by the guarantee ir it is knocked or mishand- led.
•Should the glass surface be broken, discon- nect the hob from the electrical supply imme- diately to avoid the risk of electric shock.
•The manufacturer does not accept res- ponsibility for faults or damage due to inco- rrect installation.
Technical Data
Technical data
COMMON CHARACTERISTICS OF ALL MODELS
The supply voltage and frequency are as indica- ted on the rating plate.
The protection against risk in case of fire is class "Y", so these hobs may be installed next to a wall, as shown in figure 5.
50
50
Fig. 5
Note: While the hobs are in use, and for some time after they have been switched off, there will be hot areas that can cause burns. Keep children away from the hob.
Important:
Keep the guarantee beside this user manual since it contains important techni- cal information.
12
