GB
RECOMMENDED CLEANING PRODUCTS
Product | Can be used for cleaning... | ||
|
|
| |
| ... the glass? | ... the frame? | |
|
|
| |
Gentle liquid detergents | YES | YES | |
|
|
| |
Powder or aggressive detergents | NO | NO | |
Special vitroceramic | YES | YES | |
cleaners | |||
|
| ||
|
|
| |
Grease removal sprays (ovens, etc.) | NO | NO | |
|
|
| |
Soft cleaning cloths | YES | YES | |
|
|
| |
Kitchen roll | YES | YES | |
|
|
| |
Dish cloths | YES | YES | |
Nickel cleaning pads (never dry) | YES | NO | |
|
|
| |
Steel cleaning pads | NO | NO | |
Hard (green) synthetic cleaning pads | NO | NO | |
Soft (blue) synthetic cleaning pads | YES | YES | |
|
|
| |
Scrapers for glass | YES | NO | |
Liquid polish for domestic equipment | YES | YES | |
and / or glass | |||
|
| ||
|
|
|
Please note:
•Handle cleaning scrapers with care as they have sharp edges that can cause cuts!
•Only use the edge of the scraper to clean the glass. Avoid touching the glass with the body of the scraper as this could scratch the surface.
Scraper in "safe" | Scraper with blade |
position | exposed |
| Fig. 8 |
•Use blades which are in per fect condition and immediately replace them at the first sign of wear.
•After using the scraper retract the blade and lock it in the retracted position (see figure 8).
Changes in the colour of the glass
Colour changes do not affect the operation or reliability of the hob. They are normally caused by inadequate cleaning or defective recipients.
Metallic reflections are caused by metallic recipients sliding across the glass sur face. They can be removed by thorough cleaning using a special product for cleaning vitrocera- mic hobs although it may be necessary to repeat the cleaning process several times.
15