Instructions for the User

6.9 Residual heat indicator

The hob is equipped with a residual heat indicator in the form of the symbol.

When is displayed after the heat has been switched off, it indicates that the residual heat can be used to keep food hot or melt certain foods.

The cooking zone may still be hot even after the symbol is no longer displayed. Danger of burns! The glass ceramic surface does not heat up directly but is heated only indirectly by the bases of the saucepans.

6.10 Cooking zones

The appliance has 4 cooking zones of various power levels and diameters. Their position is clearly indicated with circles and the heat is limited to within the diameters traced on the glass.

The 4 cooking zones are of the HIGH-LIGHT type; they turn on after a few seconds and their heat level can be adjusted by means of the controls on the front panel from 1 (min.) to 9 (max.).

FRONT LEFT HOTPLATE

REAR RIGHT HOTPLATE

REAR LEFT HOTPLATE

FRONT RIGHT HOTPLATE

6.11 Control panel

All the appliance's control and monitoring devices are placed together on the front panel. The symbols used are described in the table below.

REAR LEFT COOKING ZONE / INCREASE VALUE

FRONT LEFT COOKING ZONE / INCREASE VALUE

REAR RIGHT COOKING ZONE / INCREASE VALUE

FRONT RIGHT COOKING ZONE / INCREASE VALUE

DECREASE VALUE BUTTON

TIMER BUTTON

LOCK SENSORS BUTTON

HOB ON / OFF BUTTON

STOP BUTTON

 

37

Page 11
Image 11
Smeg SE640ID1 manual Residual heat indicator, Cooking zones, Control panel