Instructions for the installer

11.6 Inserting the hob into the hole in the work surface

Be very careful when inserting the hob. If the process is not followed correctly as described, the hob may be damaged.

Insert the hob, resting the frame completely on the back

edge of the hole in the work surface. Do not apply pressure to the frame as this part is very fragile and could be damaged.

• Then lower the front of the hob until it is fully inserted.

11.7 Fixing using brackets

• Fix brackets A using the appropriate screws as illustrated.

The figure to the side shows the exact holes to be used

to correctly attach the hob to the work surface with brackets.

48

Page 22
Image 22
Smeg SE640ID1 manual Inserting the hob into the hole in the work surface, Fixing using brackets