Smeg SGR30 manual Use, Switching on the Barbecue

USE

1) SWITCHING ON THE BARBECUE

The barbecue is controlled by a power regulator with 12 positions (see fig. 1). Turn the knob clockwise to the desired position (from 1 to 12) to switch it on.

To use the grill function turn the knob to position 12. A light click warns that the thermostat has been shut down and the resistance will quickly become red-hot. A red indicator lamp indicates it is switched on.

The barbecue allows fast cooking on the grill.

The function of the lava stone contained in the drip pan is to absorb drippings of oil or fat that are produced during cooking. It also accumulates heat during the initial operating phase of the resistance allowing, before long, uniform grilling very similar to that obtained using charcoal.

For better results it is recommended you pre-heat the lava stone for at least 10 minutes on position 1. This step is strongly recommended when the appliance is switched on for the first time. It reduces the risk of the cooked food absorbing the odours produced by the resistance the first time it is switched on.

FIG. 1

15