7.3Self-cleaning liners (only on some models)

Instructions for the user

Clean the oven rack and side guides with hot water and non-abrasive detergent. Rinse and dry.

The oven should be operated at the maximum temperature for about 15/20 minutes after using specific products, to eliminate the residues deposited inside the oven.

For easier cleaning, the door can be removed (see 7.4 Removing the door).

7.3Self-cleaning liners (only on some models)

The oven is equipped with continuous self-cleaning enamelled liners. These liners make the oven easier to clean and ensure its efficiency over time.

7.3.1 Using the self-cleaning liners

Periodically, to prevent food residues and unpleasant smells from accumulating inside the oven, the appliance should be operated empty at temperatures of not less than 200°C for a time varying from 30 to 60 minutes, in order to allow the self-cleaning liners to oxidise the residues present; when the oven has cooled, these will then be removed with a damp sponge

7.3.2 Looking after the self-cleaning liners

The liners should not be cleaned with abrasive creams or ordinary detergents. Use a damp sponge only, so as not to damage the special characteristics of the enamel which coats the liners.

7.3.3Assembling the self-cleaning liners

1.Remove all accessories from the oven;

2.Remove the side supports (fig.1);

3.Extract the side liners “F” and “G”(fig. 2);

4.Remove the back panel “A” after undoing the threaded ring-nutsC” (fig. 2).

5.Reassemble the panels, restoring them to their original position. Incorrect installation of the rear panel can lead to uneven cooking.

1)7.3.1 Using the self-cleaning liners7.3.2 Looking after the self-cleaning liners 2)

7.4Removing the door

26

Page 25
Image 25
Smeg SCA706X manual 7.3Self-cleaningliners only on some models, 7.4Removing the door, Instructions for the user