Instructions for the user

7. USE OF THE HOB

7.1 Lighting of the hob burners

Before lighting the hob burners check that the flame caps are in the correct position and that their burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plugs and thermocouples.

The optional grid B is for use with “woks” (Chinese pans).

To prevent deterioration of the hob we have equipped the cooker with a raised pan stand C to be placed underneath pans more than 26 cm in diameter.

The supplied reduction rest C is used also for small pans.

The drawing next to each knob shows the corresponding burner. The appliance has an electronic lighting device. Simply press and turn the knob anticlockwise

to the minimum flame symbol , until the flame is lit. Hold the knob down for a few seconds to allow the thermocouples to heat up. The burner may go out when the knob is released: this is because the thermocouple has not been sufficiently heated. Repeat the operation holding down the knob a little longer. This operation is not necessary for burners without thermocouples.

For models with thermocouples, should the burner accidentally go out, a safety device will be activated which stops the gas flow even if the tap is open.

7.2 Practical advice for using the hob burners

For better use of the burners and lower gas consumption, use covered vessel that are proportional in size to the burner to prevent the flame from licking the sides (see paragraph “ 7.3 Diameter of the vessels to be used on each burner”). When water reaches the boiling point, lower the flame so that it doesn’t overflow. To avoid burns or damage to the hob, all vessels or griddle plates must be placed within the perimeter of the hob. All vessels must have a flat and smooth bottom. When using fats or oils, be extremely careful that they don’t overheat and catch fire.

If the flame accidentally goes out, turn off the control knob and wait at least 1 minute before trying to re- light the burner.

7.3 Diameter of the vessels to be used on each burner

BURNERS

Ø MIN. AND MAX. (IN CM.)

 

 

12 - 14

1.

Auxiliary

16 - 24

2.

Semirapid

18 - 26

4. WOK

 

8

Page 5 Page 7
Page 6
Image 6
Smeg SNZ61MFX1, SNZ61MFA1 USE of the HOB, Lighting of the hob burners, Practical advice for using the hob burners, Burners
Page 5 Page 7

SNZ61MFA1, SNZ61MFX1 specifications

The Smeg SNZ61MFX1 and SNZ61MFA1 are two remarkable built-in under-counter refrigerators that exemplify the brand's commitment to blending aesthetic appeal with high functionality. Both models feature a sleek design complemented by premium materials, making them a stylish addition to any kitchen space.

One of the main features of these appliances is their generous storage capacity. With adjustable shelves, both models provide flexibility in organizing food items of various sizes, making them ideal for family needs or entertaining guests. Additionally, the drawers are designed to optimize space, allowing you to store fruits and vegetables separately while maintaining their freshness.

The refrigeration technology used in these models is advanced, ensuring consistent and reliable cooling performance. They are equipped with a No Frost system, which prevents the buildup of ice and frost, significantly reducing the need for manual defrosting. This technology not only simplifies maintenance but also enhances energy efficiency, contributing to lower electricity bills.

Both Smeg models come with an energy rating of A+, indicating high energy efficiency. This translates to lower environmental impact and cost savings for the user over time. The noise level is kept to a minimum, thanks to the innovative compressor design, making these refrigerators ideal for open-plan living spaces.

Moreover, the SNZ61MFX1 features a stainless steel finish that adds a modern and elegant touch, while the SNZ61MFA1 offers a clean and contemporary aesthetic with its sleek white exterior. The choice between these two finishes provides the opportunity to seamlessly integrate the refrigerator into various kitchen decors.

User-friendly features further enhance the appeal of these models. They include a simple electronic control panel that allows users to easily adjust temperatures and settings. Additionally, LED lighting illuminates the interior, providing clear visibility and enhancing the overall user experience.

In summary, the Smeg SNZ61MFX1 and SNZ61MFA1 stand out for their stylish design, advanced technological features, and energy efficiency. They are perfect solutions for consumers seeking practicality combined with aesthetically pleasing appliances, enriching both the functionality and style of modern kitchens.
Top Page Image Contents