Smeg SNZ61MFA1, SNZ61MFX1 Front Control Panel, Instructions for the user, Hob Burner Command Knob

Models: SNZ61MFA1 SNZ61MFX1

1 24
Download 24 pages 11.71 Kb
Page 7
Image 7
8. FRONT CONTROL PANEL

Instructions for the user

8. FRONT CONTROL PANEL

All the cooker controls and commands are on the front panel.

ELECTRIC OVEN THERMOSTAT

REAR LEFT BURNER

ELECTRIC OVEN FUNCTION KNOB

REAR RIGHT BURNER

FRONT LEFT BURNER

FRONT RIGHT BURNER

If the cooker is equipped with an electronic programmer, before using the oven make sure that the symbol HOB BURNER COMMAND KNOB ; appears on the display. See paragraph “11. ELECTRONIC PROGRAMMER”.

HOB BURNER COMMAND KNOB

The flame is lit by pressing the knob and turning it anticlockwise to minimum flame MAIN OVEN THERMOSTAT KNOB. To adjust the flame turn the knob between maximum (MAIN OVEN CONTROL KNOB) and minimum (Manual background). The burner goes out when the knob is returned to the position.

MAIN OVEN THERMOSTAT KNOB

Selection of cooking temperature is carried out by turning the knob clockwise to the required temperature, between 50° and 260°C.

If the appliance has an electric oven, the warning light will come on when the oven is heating up. When it goes out it means that the required temperature has been reached. Regular flashing means that oven temperature is being constantly maintained at the programmed level.

MAIN OVEN CONTROL KNOB

Each of the functions listed below can be used (except the oven light and the small grill) only together with the correct temperature thermostat regulation as described on page of this manual.

UPPER AND LOWER HEATING ELEMENT

GRILL ELEMENT + VENTILATION

LOWER HEATING ELEMENT

LOWER HEATING ELEMENT +

 

VENTILATION

UPPER HEATING ELEMENT + GRILL

VENTILATED HEATING ELEMENT +

ELEMENT

VENTILATION

GRILL ELEMENT

DEFROSTING

9

Page 7
Image 7
Smeg SNZ61MFA1 manual Front Control Panel, Instructions for the user, Hob Burner Command Knob, Main Oven Thermostat Knob