Description of the controls, Upper panel | Smeg ST1144S specs

User instructions

1. Description of the controls

1.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open.

1

ON/OFF BUTTON

Pressing this button energises the appliance.

SELECTED PROGRAM INDICATOR LIGHTS

2Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

3By pressing this button in sequence it is possible to select the desired program.

4

5

SALT WARNING LIGHT (certain models only)

Illumination of this light signals that salt container is empty.

RINSE AID WARNING LIGHT (certain models only)

Illumination of this light signals that rinse aid dispenser is empty.

EXTRA PROGRAM BUTTON

6This button gives access to the one of the five extra programs (see table).

EXTRA PROGRAM LIGHT

7Illuminates to indicate that one of the five extra programs (see table) is going to be executed.

Image 3

Smeg ST1144S instruction manual Description of the controls, Upper panel

Contents

Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controls Program Delay Button on some models only Setting the Washing Program and Switching on 140 Changing the Program Cancelling the Current ProgramTable for Certification Bodies Reference standard Selecting Half Load Wash on some models only Washing programs Extra Programs Delaying the Program Adjusting the Water Softening System Electronic Setting models with displayWater Hardness Table Switch Setting models without display Removing the Dishes END of Cycle Fault Description Troubleshooting Water intake system malfunction For Cleaning Dishwashers Contents Safety and operating instructions Safety instructions Safety instructions Aquastop Models Water supply connection Installation and hook-up Connecting to the Water Supply Electrical connectionDrain Connection Operating instructions Using the water softening system Using the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser Setting Adding the Detergent 1 Products General warnings and recommendations User instructions Lower Basket Using the basketsEN 50242 Standard Loads for Certification Bodies EN 50242 cycle test conditions Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper Basket Push-button version Adjusting the Upper Basket Avoid the use of acidic or abrasive detergents Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Spray Arms Prolonged Disuse Cleaning the Filter Unit Before Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598