FAILURE | PROBABLE CAUSE | |
| It is unplugged. | |
| ||
| Your fuse is defected. | |
| ||
| The electric power is | |
| off. | |
Your machine does not | Start/pause button has | |
not been pressed. | ||
operate. | ||
The program knob is in | ||
| ||
| O(off) status. | |
| The door is not shut | |
| ||
| properly. | |
| Water tap is closed. | |
| ||
| The water inlet hose | |
| may be bent. | |
Your machine does not | The water inlet hose is | |
obstructed. | ||
receive water. | The valve inlet filter is | |
| obstructed. | |
| The door is not shut | |
| properly. | |
| The drain hose is | |
| ||
| obstructed or bent. | |
Your machine is not | The pump filter is | |
obstructed. | ||
draining water. | The clothes are not | |
| placed inside the | |
| machine in a well- | |
| balanced manner. | |
| The feet of your | |
Your machine is | machine are not | |
adjusted. | ||
vibrating. | ||
Transportation screws | ||
| ||
| are not removed. |
METHODS OF
ELIMINATION
Insert the plug into the socket.
Change your fuse.
Check the electric power.
Press the start/pause button.
Bring the program knob on the desired status.
Shut the door properly. You should hear the click.
Open water tap.
Check the water inlet hose.
Clean the filters of water inlet hose. (*)
Clean the valve inlet filters. (*)
Shut the door properly. You should hear the click.
Check the drain hose.
Clean the pump filter.
(*)
Spread the clothes inside the machine in an orderly and well- balanced manner.
Adjust the feet. (**)
Remove transportation screws. (**)
(*)See the section concerning the maintenance and cleaning of your machine. (**)See the section concerning installations your machine.
48
