Smeg WM40T-1 technical specifications Failure Probable Process Code Indicator To be Done

FAILURE	FAILURE	PROBABLE	THE PROCESS
CODE	INDICATOR	FAILURE	TO BE DONE
		The heater of your	Shut down your
	The start/pause		machine and
		machine or the	unplug. Turn off
Err 05	light and program
		heat sensor has	your tap and apply
	end light blink.
		failed.	to the nearest
			authorized service.
	The program		Shut down your
			machine and
Err 06	ready light and	The motor has	unplug. Turn off
	program end light	failed.	the tap and apply
	blink.		to the nearest
			authorized service.
	The program		Shut down your
	start/pause light,		machine and
Err 07	ready light and	Configuration	unplug. Turn off
	program end light	error.	the tap and apply
	stays on		to the nearest
	permanently.		authorized service.
	The start/pause		Shut down your
			machine and
	light,program
			unplug. Turn off
Err 08	ready light and	Fault error
			the tap and apply
	program end light
			to the nearest
	blink.
			authorized service.
			If the network
			voltage is lower
			than 150V or
	The program		higher than 260V,
		The network	your machine will
	ready light and
			automatically stop.
Err 09	program end light	voltage is too high
			When the network
	stays on	or too low.
			voltage is
	permanently.
			recovered, your
			machine will
			continue its
			operation.

53