5.45 MOTORIZED TREADMILL 22
ASSEMBLY
STEP5: Assemble Computer Console
A.Rotate the console until it stops as shown in diagram below .
B.Tighten the screw (807) of the console connect tube (213) for right and left side . Console connect tube (213) will be adjust for the next steps of assembly .
C.Attach the Handle Bar Cover ‐ LR (208) to the underside of the console and the inside
of the left upright (301), Secure with four M4×15mm screw (802). And secure with | 802 | X20 |
|
|
|
|
|
|
|
| |||
two M4×15mm screw (802) between the Handle Bar Cover ‐ LR (208) outside and |
|
|
|
|
|
|
the console housing ‐upper. |
|
|
|
|
|
|
D.Attach the Handle Bar Cover ‐ LL (207) to the top of the console and the outside of the Upright ‐ Left (301).And secure with four M4×15mm screw (802).
E.Repeat the above process for the right hand side cover (209) and cover (210) as shown in diagram.
