14
SMOOTH CE 7.4 ELLIPTICAL TRAINER
ASSEMBLY
Step 6:
Attach the Accessory Tray Bracket (96) to Handrail – Left (7) and Handrail – Right (8) with two M6 x 12mm Screw (105) as shown in FIG.11.
Connect the Wire Harness – Top (109) to the Wire Harness – Upper (111) and the Hand Pulse Sensor Wires – Top (116) to the Hand Pulse Sensor Wires – Upper (117) as shown in FIG.12.
Attach the Console Housing (1) to the Handrail – Left (7) and Handrail – Right (8). First fit the fringe of Accessory Tray (45) to the Rubber Ring (44) on the Handrail – Left (7) and Handrail – Right (8). Then secure the Accessory Tray Bracket (96) to the Accessory Tray (45) with two M6 x 15mm Bolt (77) and two M6 Nylon Nut (86) as shown in FIG.13. Then secure the Console Housing (1) using two M6 x 20mm Screws (104) as shown in FIG.14.
NOTE: Make sure all wires are recessed into the Console Housing, do not trap or pinch any of the wires.
109
116
116
111
117
117
77
7 
|
|
|
| 45 | 1 |
|
|
|
|
| |
86 |
|
|
|
| 116 |
|
|
|
|
| 109 |
44 | 96 | 44 | 8 | 8 | 117 |
|
|
Fig 13 | 111 |
| |
| 7 |
| 44 |
Fig 12
Fig 11
78
105 | 96 |
1
7
104
Fig 14
Visit us at: www.smoothfitness.com
