Integrated USB 2.0 Compatible
Datasheet
Chapter 10 Package Outline
Figure 10.1 64 Pin TQFP Package Outline (10x10x1.4 mm body - 2 mm footprint)
Table 10.1 64 Pin TQFP Package Parameters
| MIN | NOMINAL | MAX | REMARKS |
|
|
|
|
|
A | ~ | ~ | 1.60 | Overall Package Height |
A1 | 0.05 | ~ | 0.15 | Standoff |
A2 | 1.35 | ~ | 1.45 | Body Thickness |
D | 11.80 | ~ | 12.20 | X Span |
D1 | 9.80 | ~ | 10.20 | X body Size |
E | 11.80 | ~ | 12.20 | Y Span |
E1 | 9.80 | ~ | 10.20 | Y body Size |
H | 0.09 | ~ | 0.20 | Lead Frame Thickness |
L | 0.45 | 0.60 | 0.75 | Lead Foot Length |
L1 | ~ | 1.00 | ~ | Lead Length |
e | 0o | 0.50 Basic | 7o | Lead Pitch |
q | ~ | Lead Foot Angle | ||
W | 0.17 | 0.22 | 0.27 | Lead Width |
R1 | 0.08 | ~ | ~ | Lead Shoulder Radius |
R2 | 0.08 | ~ | 0.20 | Lead Foot Radius |
ccc | ~ | ~ | 0.08 | Coplanarity |
Notes:
1.Controlling Unit: millimeter.
2.Tolerance on the true position of the leads is ± 0.04 mm maximum.
3.Package body dimensions D1 and E1 do not include the mold protrusion. Maximum mold protrusion is 0.25 mm per side.
4.Dimension for foot length L measured at the gauge plane 0.25 mm above the seating plane.
5.Details of pin 1 identifier are optional but must be located within the zone indicated.
Revision 2.3 | 46 | SMSC USB2504/USB2504A |
| DATASHEET |
|