SMSC USB3290 Chapter 6 Electrical Characteristics

Small Footprint Hi-Speed USB 2.0 Device PHY with UTMI Interface

Datasheet

Chapter 6 Electrical Characteristics

Table 6.1 Electrical Characteristics: Supply Pins (Note 6.1)

PARAMETER	SYMBOL	CONDITIONS		MIN	TYP	MAX	UNITS
Unconfigured Current	IAVG(UCFG)	Device Unconfigured			55		mA
FS Idle Current	IAVG(FS)	FS idle not data transfer			55		mA
FS Transmit Current	IAVG(FSTX)	FS current during data			60.5		mA
		transmit
FS Receive Current	IAVG(FSRX)	FS current during data			57.5		mA
		receive
HS Idle Current	IAVG(HS)	HS idle not data transfer			60.6		mA
HS Transmit Current	IAVG(HSTX)	HS current during data			62.4		mA
		transmit
HS Receive Current	IAVG(HSRX)	HS current during data			61.5		mA
		receive
Low Power Mode	IDD(LPM)	VBUS 15kΩ pull-down and			83		uA
		1.5kΩ pull-up resistor
		currents not included.
Note 6.1 VDD3.3 = 3.0 to 3.6V; VSS = 0V; TA = -40oC to 85oC; unless otherwise specified.
Table 6.2 DC Electrical Characteristics: Logic Pins (Note 6.2)
PARAMETER	SYMBOL	CONDITIONS	MIN		TYP	MAX	UNITS
Low-Level Input Voltage	VIL		VSS			0.8	V
High-Level Input Voltage	VIH		2.0			VDD3.3	V
Low-Level Output Voltage	VOL	IOL = 8mA				0.4	V
High-Level Output Voltage	VOH	IOH = -8mA	VDD3.3				V
			- 0.5
Input Leakage Current	ILI					± 1	uA
Pin Capacitance	Cpin					4	pF
Note 6.2 VDD3.3 = 3.0 to 3.6V; VSS = 0V; TA = -40oC to 85oC; unless otherwise specified.

SMSC USB3290	13	Revision 1.5 (11-02-07)
	DATASHEET