Features & Controls

Auger Control

Engages the auger/impeller when depressed. Releasing the control stops the auger/impeller.

Chute Direction Control

Models with Electric Chute Rotator: Depressing the chute rotator switch rotates the chute left or right.

Models with Manual Chute Rotator: Turning the crank rotates the discharge chute to desired position.

Remote/Regular Deflector Control

Regular (Knob) Chute Deflector: Locks chute deflector in desired position. Tilting the chute deflector UP provides a higher stream and greater distance, while tilting the deflector DOWN provides a lower stream and less dis- tance.

Remote Chute Deflector: Twist the knob to unlock the chute deflector. Pull or push the knob to change the deflector angle. UP provides a higher stream and greater distance, while tilting the deflector DOWN pro- vides a lower stream and less distance.

Easy Turn™ Control

Easy Turn Control: Engaging the Easy Turn™ lever releases the right wheel to allow easy turning in tight areas. Releasing the control automatically engages both drive wheels for full traction.

Traction Lock Pins: The right traction wheel can be completely released using the locking pin (see Figure 7). This allows the unit to be easily moved with the engine off.

Starter

Electric Start (If Equipped): Depressing the starter but- ton activates the electric starter. The electric start button operates on 120 Volts AC, which is provided by connec- tion to the extension cord provided with units equipped with this feature. Connect this extension cord ONLY to a properly grounded 3 prong electrical outlet.

Recoil Starter (All Models): Pulling the recoil handle cranks the engine.

Fuel

Fuel tank filler cap (see illustration). Note: The fuel shut off valve is located under the fuel tank or on the front of the engine. Close the valve when the snowthrower is not in use. Open the valve before starting.

Primer Button

When pressed, the primer button provides initial fuel to help start a cold engine. Normally, pressing the primer button twice will provide enough fuel to start a cold engine.

Throttle Lever

Controls engine speed. Move toward the hare icon for faster engine speed, move toward the turtle icon for slower engine speed. Move the throttle all the way to STOP to stop the engine. Set throttle to FULL/FAST (hare icon) for operation.

Engine Key

The engine key prevents the engine from being started. The key must be fully inserted into the key slot for the unit to start. The key can also used to stop the engine by pulling the key out of the key slot.

Choke Knob

The choke knob adjusts the air/fuel mixture, and is used to help start a cold engine by providing a richer mixture. Once the engine is warm and running smoothly, the choke knob should be set to the off position to provide a normal air/fuel mix.

Grip Warmers (Select Models)

The optional grip warmers are powered when the engine is running and have three settings: low, off, and high.

Headlight (Select Models, Not Pictured)

For use in low sunlight - early morning and evening. The headlight is on at all times when the engine is running.

10524, 11528, 1332, 1338, 13388, 10524, 11528, 1332, 13388, 13388 specifications

The Snapper brand has long been recognized for its high-quality outdoor power equipment, particularly in the realm of lawn care and maintenance. Among its diverse lineup, models such as Snapper 10524, 11528, 1332, 1338, and 13388 stand out due to their advanced features, innovative technologies, and reliable performance.

The Snapper 10524 is best known for its robust construction and ease of use. This model typically features a powerful engine capable of efficiently handling various mowing tasks. The 10524 is equipped with an adjustable cutting height system, allowing users to customize the length of their grass with precision. Its compact design makes it easy to maneuver around tight spaces, ensuring that every inch of lawn is well-maintained.

Meanwhile, the Snapper 11528 offers enhanced performance with a larger cutting deck that increases efficiency. This model is particularly suited for bigger lawns, reducing mowing time significantly. The 11528 often includes features like swivel wheels for improved maneuverability and an ergonomic handle for comfortable use over extended periods. It also boasts advanced mulching capabilities, allowing users to recycle grass clippings effectively.

The Snapper 1332 and 1338 models are designed with cutting-edge technologies aimed at optimizing performance. Both models incorporate high-performance engines while maintaining a lightweight build, offering an excellent power-to-weight ratio. They emphasize user comfort with padded handles and intuitive controls, which make operation simpler and more enjoyable. The 1332 is often highlighted for its agility, making it suitable for homeowners looking for a snappy, efficient solution for regular lawn maintenance.

The Snapper 13388, on the other hand, is considered a powerhouse in the lineup. It boasts a robust engine, a larger deck size, and advanced features that cater to professional landscapers and dedicated homeowners alike. One of its standout characteristics is the integrated bagging and mulching system, which enhances versatility depending on mowing conditions.

In summary, the Snapper 10524, 11528, 1332, 1338, and 13388 models embody Snapper's commitment to innovation, performance, and user-friendly designs. With their distinct features, such as adjustable cutting heights, improved maneuverability, and optimized mulching systems, they cater to a wide range of lawn care needs, ensuring that each model brings something unique to the table. Whether for residential use or professional landscaping, these Snapper machines are equipped to deliver exceptional results every time.

Snapper 10524, 11528, 1332, 1338, 13388, 10524, 11528, 1332, 13388, 13388 Features & Controls

Models: 10524, 11528, 1332, 1338, 13388 10524, 11528, 1332, 13388, 13388