Toshiba 51HX94 owner manual Using the auto aspect ratio feature, To set the scroll settings

Chapter 8: Using the TV’s features

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for TheaterWide 2 and TheaterWide 3 modes.

To set the scroll settings:

1.Press MENU and open the VIDEO menu.

2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

3.In the PICTURE SIZE field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

4.Press z to highlight the PICTURE SCROLL field.

5.Pressx or • to scroll the picture up and down as needed, from Ð10 to +20.

Theater Settings			Theater Settings
Picture Size		Full		Picture Size		Full
Picture Scroll	0			Picture Scroll	–5
Cinema Mode		Film		Cinema Mode		Film
Display Format		1080i		Display Format		1080i
Auto Aspect Ratio		On		Auto Aspect Ratio		On
Reset	Save	Done		Reset	Save	Done

6.To save your scroll settings temporarily, highlight DONE and press ENTER.

To save your scroll settings permanently, highlight SAVE and press ENTER.

Using the auto aspect ratio feature

When the AUTO ASPECT feature is set to ON and one of the following input sources is received, the picture size is automatically selected (as described in the table below):

¥A 480i signal from the VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD-1, or ColorStream HD-2 input.

¥A 480i or 480p signal from the HDMI input.

Aspect ratio	Automatic aspect size
	(automatically selected
of signal source
	when AUTO ASPECT is ON)
4:3 normal	Natural (with side bars)
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined	User-selected picture size
(no ID-1 data or )
	(see pages 64Ð65)
HDMI aspect data)

Note:

•The AUTO ASPECT feature is not applicable to antenna or Cable input sources.

•The AUTO ASPECT feature is not available when the POP double-window is open, the FREEZE mode is active, or the TV Guide On Screen system is open.

To turn on the AUTO ASPECT feature:

1.Press MENU and open the VIDEO menu.

2.Highlight THEATER SETTINGS and press ENTER.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

3.In the AUTO ASPECT RATIO field, select ON.

4.To save your settings temporarily, highlight DONE and press ENTER.

To save your settings permanently, highlight SAVE and press ENTER.

Theater Settings

Picture Size		Full
Picture Scroll	0
Cinema Mode		Film
Display Format		1080i
Auto Aspect Ratio		On
Reset	Save	Done

To turn off the AUTO ASPECT feature:

Select OFF in step 3 above.

72 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

51,57HX94(E)067-76 72 9/12/04, 10:03 PM