Toshiba 51HX94 About the connection illustrations, Connecting a digital CableCARD, You will need

Chapter 2: Connecting your TV

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output jacks on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each deviceÕs ownerÕs manual.

Connecting a digital CableCARD™

This digital television is capable of receiving analog basic, digital basic, and digital premium cable television programming by direct connection to a Cable system providing such programming.

A security card (such as a digital CableCARDª), provided by your Cable operator, is required to view encrypted digital programming.

Certain advanced and interactive digital cable services (such as video-on-demand, a Cable operatorÕs enhanced program guide, and data-enhanced television services) will not work with the use of a CableCARD and may require the use of a separate set-top box from your Cable operator.

For more information, call your local Cable operator.

You will need:

￿one digital CableCARD (contact your Cable operator)

￿digital Cable subscription service (contact your Cable operator)

￿To view encrypted digital channels:

1.Connect your digital Cable TV cable to ANT-1.

2.With the front of the CableCARDª facing right, insert it into the CableCARD slot on the back of the TV (see illustration below left).

3.After the CableCARD is inserted, a CableCARD option appears in the APPLICATIONS menu, with informational screens provided by your digital CableCARD service. See page 51 for additional information.

CableCard Connected -- Acquiring
channel information.
CableCard services will only operate	Applications
with cable signal connected to Antenna 1.
	TV Guide On Screen			Conditional Access
OK	Digital CC Selector			CableCARD(tm) Pairing
	Picture Viewer			CableCARD(tm) Status
	CableCARD			Network Setup
					DVD RTN
		Navigate	Select			Back	EXIT	Exit
					CH RTN

OUT 1

OUT 2

TheaterNet

						TheaterNet
						IEEE1394	EJECT	ANT1
					INSERT THIS END￿			(CABLE)
		COLOR	COLOR		Digital		ª
VIDEO 1	VIDEO 2
		STREAM	STREAM
		HD-1	HD-2
S-VIDEO	S-VIDEO				R
		Y	Y	2		2
		PB	PB	1		1		ANT2
VIDEO	VIDEO	PR	PR	VIDEO	VAR
					AUDIO
				L/
L/	L/
MONO	MONO	L	L	MONO	L		CableCARD™	ANT (75	)
		AUDIO	AUDIO
AUDIO	AUDIO			AUDIO		G-LINK
		R	R
R	R			R	R
	IN				OUT	DIGITAL AUDIO OUT

From digital Cable service (connect to ANT 1 only)

NOTE:

•Never remove the CableCARD carelessly. Be sure to use the EJECT button when removing the CableCARD.

•Never insert any object or card (including, without limitation, a PCMCIA card) other than a CableCARD into the CableCARD slot.

•Always make sure the CableCARD is facing the correct direction.

•Connect the cable for your digital Cable TV service to ANT-1 only.

________

CableCARD is a trademark of Cable Television Laboratories, Inc.

•A digital Cable subscription is required to use a CableCARD. Contact your Cable company for information.

•If the TV locks up with the CableCARD inserted, press the RESET button on the TV front or unplug the TV, plug it in again, and press POWER.

•When using a CableCARD, channel programming (page 41) is unnecessary because the CableCARD automatically loads the Cable channel list into the TV’s channel memory.

•The CableCARD will take several seconds to “pair” with the TV. CableCARD information and channel listings will not be available until this “pairing” process is completed.

12 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

51,57HX94(E)012-25 12 9/12/04, 7:01 PM