Toshiba 51HX94 Setting up and using TheaterNet on-screen device control, Setting up TheaterNet

Chapter 6: Setting up your TV

Setting up and using TheaterNet™ on-screen device control

The TheaterNet feature allows you to control many brands of IEEE-1394 and/or infrared remote-controlled A/V devices through your TV using on-screen control icons and the TVÕs remote control.

Note:

•Although the TheaterNet on-screen device control feature includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. If you are unable to program the TheaterNet feature to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

•For IR pass-through device control information, see “Connecting infrared remote-controlled devices to the IR OUT jack” on page 21.

Setting up TheaterNet

All device types except IEEE-1394 require the following setup process before you can control them using the TheaterNet on-screen icons.

All Compatible IEEE-1394 devices are automatically recognized by the TheaterNet feature and do not require setup.

Note: See page 22 for details about the IEEE-1394 ports. If your IEEE-1394 device is not recognized through the IEEE-1394 port or through the TheaterNet feature, it may be possible to set it up for IR pass-through control as an infrared device (see page 21).

To set up TheaterNet device control:

1.Make sure you have properly connected your infrared remote-controlled device(s). See page 21 for details.

2.Press MENU and open the SETUP menu.

3.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 4).

Setup

Installation
Sleep Timer
On/Off Timer
HDMI Audio Selection				Auto
Side Show Interval			2 Sec
AVHD Skip Time			15 min
Convergence
				DVD RTN
	Navigate	Select			Back	EXIT	Exit
				CH RTN

4.Open the DEVICES menu, highlight THEATER NET DEVICES, and then press ENTER.

Devices

IEE-1394 Devices

TheaterNet Devices

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

The TheaterNet Setup menu opens.

TheaterNet Setup

						Select device
Input	Video 1					type, brand,
						and IR code
Type	VCR					from owners
Brand	Toshiba					manual.
IR List	0000
IR Code						Test
		0	0	0	0
Exit		Save				Reset

5.Using the x • buttons, select the INPUT the device is connected to.

Note: When the input is changed, all unsaved settings will be lost.

6.Press z and then x • to select the device TYPE.

7.Press z and then x • to select the device BRAND.

Note: When selecting a new brand, the IR code will be set to zero.

8.Press z and then x • to select the deviceÕs IR code.

9.If the desired IR code is found, skip to step 10.

If the desired IR code is not in the list, press z and use the Channel Number buttons to enter the device IR code.

Note: You can find the IR code for your device in the on-screen list or in the TheaterNet device code table on pages 46–48.

10.Highlight TEST and press ENTER to test whether the device responds to the code.

If the device does not respond to the code, repeat steps 8 and 9 using another code for the same device.

11.When done, highlight SAVE and press ENTER.

To remove a device from TheaterNet:

1.Follow steps 1Ð5 above.

2.Highlight RESET and press ENTER.

3.Highlight SAVE and press ENTER.

44		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
51,57HX94(E)044-52	44	9/12/04, 7:10 PM

(E) 51/57/65H93