Toshiba 51HX94 owner manual LED indications, TV Guide On Screen FAQs

Chapter 10: Troubleshooting

LED indications

The green and red LED lights are on the TV front panel, to the right of the POWER button.

LEDs
{
MENU	VOLUME	CHANNEL	EXIT	TV/VIDEO TouchFocus	S-VIDEO VIDEO	L/MONO	R	RESET
						AUDIO

LED Indication	Description
Green blinks 3 times (after the	Wait about 30 seconds until the Green LED lights continuously, and then press POWER to turn ON the TV.
power cord is plugged in).
Green lights solid.	Indicates that the TV power cord is plugged in and the power is OFF. This is called Òstandby mode.Ó
Red lights solid.	Indicates that the TV power cord is plugged in and the power is ON.
Red blinks.	Press POWER to turn OFF the TV, and unplug the power cord. Plug in the power cord again and press POWER to
	turn ON the TV. If the problem persists, turn OFF the TV, unplug it, and contact a Toshiba Authorized Service Center.
Green blinks at 3-second intervals.	The fan for cooling the CableCARD has stopped. Press POWER to turn OFF the TV , unplug the power cord,
	and contact a Toshiba Authorized Service Center.

TV Guide On Screen® FAQs

The following are frequently asked questions about the TV Guide On Screen system. The answers represent the most likely solutions to the problem.

SETUP

1.Q: What if I move and my ZIP code or postal code changes?

A:Highlight SETUP in the Service Bar. Press z to highlight CHANGE SYSTEM SETTINGS (page 65), and then press ENTER. Follow the on-screen prompts to enter new information (see Chapter 3 for details). It can take up to 24 hours to receive new data.

2.Q: What if I change my cable hook-up to antenna or vice versa?

A:Highlight SETUP in the Service Bar. Press z to highlight CHANGE SYSTEM SETTINGS (page 65), and then press ENTER. Follow the on-screen prompts to enter new input information and rescan channels for the new input (see Chapter 3 for details).

3.Q: What if I change cable boxes?

A:Highlight SETUP in the Service Bar. Press z to highlight CHANGE SYSTEM SETTINGS (page 65), and then press ENTER. Follow the on-screen prompts to enter new input information and rescan channels for the new input (see Chapter 3 for details).

4.Q: I used to have a cable box, but now I get direct cable.

What do I do?

A:Highlight SETUP in the Service Bar. Press z to highlight CHANGE SYSTEM SETTINGS (page 65), and then press ENTER. Follow the on-screen prompts to enter new input information and rescan channels for the new input (see Chapter 3 for details).

5.Q: If I add a recorder or change my cable service, how do I change my Setup information?

A:Highlight SETUP in the Service Bar. Press z to highlight CHANGE SYSTEM SETTINGS (page 65), and then press ENTER. Follow the on-screen prompts to enter new information (see Chapter 3 for details). It can take up to 24 hours to receive new data.

6.Q: Why does it take up to 24 hours for the TV Guide

On Screen system to be ready for use?

A:The initial setup process consists of finding the stations in your area that carry the TV Guide On Screen system data and tuning to those stations to receive the setup and listings data.

94 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

51,57HX94(E)092-97 94 9/12/04, 10:10 PM