Toshiba 51HX94 owner manual TV Guide On Screen Reminder

Chapter 5: TV Guide On Screen setup

Setting up the TV Guide On Screen system (continued)

Screen 20: If your VCR stopped playing the tape after testing, select YES and press ENTER. Screen 21 appears.

Did your VCR stop playing?

If your VCR did not stop playing the tape after testing and you want to test the same code again, select TEST THIS CODE AGAIN and press ENTER.

If you want to test a different code, select NO and press ENTER. Screen 19 appears.

Note: Many VCRs require testing more than one code.

Screen 21: Review the setup information displayed on your TV screen (an example is shown below).

If the information on your TV screen is correct for your setup, select YES, END SETUP and press ENTER. Screen 22 appears.

If the information is incorrect, select NO, REPEAT SETUP PROCESS and press ENTER. Screen 1 appears.

Screen 22: Congratulations! You have successfully completed TV Guide On Screen system setup. Press ENTER to display screen 23.

Screen 23: This screen provides helpful information on using your TV Guide On Screen system.

Press ENTER to exit the TV Guide On Screen setup and watch TV.

TV Guide On Screen Reminder

The TV Guide On Screen system receives program listings data through your Cable or over-the-air video signal. In order to receive regular program listings, please remember to do the following:

1.Leave the TV in standby mode when it is not in use (such as overnight or when you are not watching it) by turning it OFF but leaving the power cord plugged in.

2.If you have a Cable box connected, leave it ON.

3.If you have a VCR connected, turn it OFF when not in use. (Do not unplug the power cord.) See page 13 for VCR connection instructions.

4.If you have more than one Cable system in your area, you may be prompted to select which Cable systemÕs program data to download. If so prompted, follow the on-screen instructions.

Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 39

51,57HX94(E)036-39 39 9/12/04, 7:07 PM